Constant Light Control - Niko SWISS GARDE 300 Applikationsbeschreibung

Active sensors
Sensitivity setting
Numbering of the PIR sensors
2
1
programming button
The PIR sensors 1, 2 and 3 can be enabled individually or in groups of two.
The 3 positions of the pyro detectors are visible in the above illustration.

3.7. Constant light control

2524X_2525XCH_ETS_description
The 3 PIR sensors can be enabled individually or in groups. The numbers 1, 2, and 3 correspond to positions 1, 2, and 3 as shown in the illustration below.
The sensitivity can be adjusted from 1 to 10. (1 = min, 10 = max)
The default value is 5.
3
LUX sensor
LED motion flashes once with each detection
LED programming glows upon pressing
2524X/2525XCH
9
EN