Niko SWISS GARDE 300 Applikationsbeschreibung Seite 6

2524X/2525XCH
If locked object = 0
If locked object = 1
Object type for output - light
Object value for ON when object type is:
light = switching
light = dimming
light = scene
Object value for OFF when object type:
light = switching
light = dimming
light = scene
Transmission conditions for switching
object
Transmission conditions for external
switch
Idle time after switch off
Cyclical transmission
3.2.1. Light – Preset Dimming
Object type for output-light
3.2.2. Light - Standby parameters
6
EN
Selects an action to be executed after reception of a 0 command
Selects an action to be executed after reception of a 1 command
This will define object 0. The following options are available: switching, dim completely, scene selection
Select ON or OFF (ON is default value)
Select preset dim value from 0% to 100%
Select scenes from 1...32
Select ON or OFF (OFF is default value)
Select preset dim value from 0% to 100%
Select scenes from 1...32
Transmission filter for output object 0: Output - Light - Switching
Selection: ON and OFF; neither ON nor OFF; only ON; only OFF
Selection: ON and OFF; neither ON nor OFF; ON only; OFF only
Can be set from 1 sec to 60 secs
Applications:
Prevention off bus traffic excess
Prevention of erroneous lighting restart if:
• light bulbs are cooling down
• room is deserted after switching off with a KNX switch.
If the light channel is in switching mode, it is possible to cyclically transmit the "ON" mode.
The interval time for cyclical transmission can be set from 1 second to 4 hours.
Preset dimming
This setting enables the standby light function. The Standby value option appears in the Light menu.
2524X_2525XCH_ETS_description