Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5)
Slide the drive onto the fittings (D) with the mounting brackets (B). Use a
little force to do so until the pipes lock into their holders.
6)
Slide the buckles (A) back onto the drive until they lock into place. The
engine is now firmly attached to the bed box.
7)
After installing the motor, make sure the remote control cable is connected
and relieved of load.
8)
Reconnect the plug to the socket so that the internal energy storage can
recharge.
9)
Then connect the battery.
10.2.
Block battery connection
ENG
Werbung
Kapitel
Inhaltsverzeichnis
