Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Parkside PDM 300 C2 Bedienungsanleitung Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 99
PARKSIDE PDM 300 C2
Function generator
Signal
1 kHz square wave signal
The precision quoted in ± (% of display + number of digits) applies for 5% to 100% of the relevant
measurement range and is guaranteed for a period of one year at an ambient temperature of 18°C to
28 °C and a max. air humidity of 75%. If the conditions are different, the precision is not guaranteed.

4. Safety instructions

Before you use this multimeter for the first time, please read the following notes and heed all warnings,
even if you are familiar with handling electronic devices. Keep this manual in a safe place for future
reference. If you sell the multimeter or pass it on, always include these instructions.
WARNING! This signal word indicates a danger with a moderate risk, which can lead
to death or major injuries if not avoided.
CAUTION! This symbol indicates important instructions to protect against damage to
property.
This symbol denotes further information on the topic.
DANGER! Before opening the multimeter, it must be isolated or disconnected from
dangerous active voltage. There is a risk of electric shock!
DANGER! This symbol denotes harmful electric voltage!
Alternating current
Direct current
Protection Class II
WARNING! Electrical devices are not suitable for children. People with disabilities should only
use electrical devices within the limits of their abilities. Never allow children or persons with
disabilities to use electrical devices unsupervised. They may not comprehend the potential risks.
Batteries and small parts represent potential choking hazards. Therefore, keep the battery in a
safe place. If a battery is swallowed, seek medical help immediately. Keep the packaging out of
the reach of these people. Packaging material is no toy. There is a risk of suffocation!
WARNING! If you notice any smoke, unusual noises or strange smells, stop the measurement
immediately. If this occurs, the multimeter should not be used before it has been inspected by
authorised service personnel. Never inhale smoke from a possible device fire. If you do
inadvertently inhale smoke, seek medical attention. Smoke inhalation can be damaging to your
health.
6 - English
Voltage
approx. 3 V peak-peak
Output impedance
approx. 10 kOhm

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis