Intended Use; Package Contents - Parkside PDM 300 C2 Bedienungsanleitung Und Sicherheitshinweise

Congratulations!
By purchasing the PARKSIDE PDM 300 C2 Digital Multimeter hereinafter referred to as the multimeter,
you have opted for a quality product.
Before first using it, familiarise yourself with the way the multimeter works and read these operating
instructions through carefully. Be careful to follow the safety instructions and only use the multimeter as
described in the operating instructions and for the applications given.
Keep these operating instructions in a safe place. If you pass the multimeter on to someone else, make
sure to give them all the relevant documents with it.

1. Intended use

The multimeter allows you to measure DC/AC voltages and direct and alternating currents. The
multimeter also has functions for resistance measurement and diode testing, a function generator and a
continuity check function. This multimeter has not been designed for corporate or commercial use. Use
the multimeter for private purposes only. Any use other than that mentioned above does not correspond
to the intended use. This multimeter fulfils all relevant norms and standards associated with CE
Conformity. In the event of any modification to the multimeter that was not approved by the
manufacturer, compliance with these standards is no longer guaranteed. The manufacturer shall not be
liable for any damage or malfunctions resulting from such modifications.
Observe the regulations and laws in the country of use.

2. Package contents

• Multimeter
• 2 measuring probes (inc. cables)
• 9 V block battery
• 1 screwdriver
• These operating instructions
These operating instructions have a fold-out cover. On the inside of the cover is a diagram of the
multimeter with the components numbered. The meanings of the numbers are as follows:
1 Display
2 HOLD button (memory button)
3 Range selector switch
4
COM connection (earth
5 OUT INPUT connection (
6 Measuring probes (inc. cables)
7 10 A connection
8 SELECT button (switches between direct/alternating current)
)
= square wave signal)
PARKSIDE PDM 300 C2
English - 3