Cleaning The Milk Frother - Silvercrest SEM 1100 B3 Bedienungsanleitung

Cleaning the milk frother

CAUTION – PROPERTY DAMAGE
■ NEVER use abrasive, corrosive or chemical agents to clean the appliance.
These could damage the outer surfaces of the appliance.
1) Place an empty container under the milk frother
2) Immediately after use, turn the steam control
allow the steam to escape for a few seconds.
3) Turn the steam control
the appliance off and remove the plug from the mains power socket.
4) Allow the nozzle to cool down.
5) Pull the casing of the milk frother
warm water.
6) Wipe the nozzle under the casing with a damp cloth. If necessary, add a little
mild detergent onto the cloth. After cleaning with detergent, always wipe off
with a cloth moistened with clean water. Ensure that there is no detergent
residue left on the nozzle.
7) Push the casing back onto the nozzle (Figure 1).
Figure 1
■ 16 │ GB │ IE
off (as far as it will go in the direction " - "), switch
off (Figure 1) and clean it thoroughly in
.
to the " + " position and
SEM 1100 B3