Resetting The Light; Pairing The Led Mood Light With The Smartphone; Disconnecting The Smartphone; App Functions - LIVARNO LUX 14148906L Bedienungs- Und Sicherheitshinweise

Initial use / Resetting the light / Pairing the LED mood light... / App functions
Note: The battery will also be charged when
the light is in operation.

Resetting the light

The light must be in learning mode to pair the light
with the app. This is indicated by the light flashing
regularly.
If the light does not automatically start flashing, re-
turn the light to learning mode. To activate learning
mode, switch the light on and off as follows:
‒ switch on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
The light should now be flashing regularly in
learning mode.
Note: This procedure only resets the product to
offline mode and starts the learning mode.
If you want to remove all product and cloud data,
please refer to the section Disconnecting the remote
control and smart phone. Follow the instructions and
select "Disconnect and delete data" under "Remove
device".
Pairing the LED mood light
with the smartphone
Please consult the "Lidl Home" app for DETAILS of
our privacy policy.
1. Open the "Lidl Home" app.
2. Go to the "Home" tab
Select "+" (add device).
3. Choose the category "Lighting" and the de-
sired lighting type.
4. Select the gateway (only available when using
multiple gateways).
5. Now click "OK".
18 GB/IE
.
6. Go to "Confirm" whilst the LED mood light is
flashing.
7. Connect to the device.
8. Go to .
9. Go to "Device name". Enter a name and
confirm.
10. Choose a room in order to specify the position
of the light. The selected room will now be
greyed out.
11. Click "Finish" to confirm.
12. The learning process is complete.
13. Click
< to return to the home screen.

Disconnecting the smartphone

1. Open the "Lidl Home" app.
2. Go to the "Home" tab
3. Choose one of the categories:
– ZigBee gateway
– LED mood light
4. Go to .
5. Go to "Remove device".
6. Click "Confirm" to proceed. To remove all
product data from the cloud, select "Disconnect
and delete data".

App functions

Note: Make sure that you are always operating
the current version of the app on your smartphone.
Update the app if necessary.
Note: To use voice control, the light must be con-
nected online with the "Lidl Home" app and the
"Google Home" app.
The following modes are
available via app control
Switching on and off
– Remaining time:
– :
– Programme:
.
set timer
switch on and off
create schedules to auto-
matically switch the lights
on and off at certain times