Safety Instructions For Batteries / Rechargeable Batteries; Preparation; Initial Use; Charging The Rechargeable Battery - LIVARNO LUX 14148906L Bedienungs- Und Sicherheitshinweise

Safety instructions for
batteries / rechargeable
batteries
DANGER TO LIFE!
Keep batteries / rechargeable batteries out of
reach of children. If accidentally swallowed
seek immediate medical attention.
DANGER OF EXPLOSION!
Never recharge non-rechargeable batteries.
Do not short-circuit batteries / rechargeable
batteries and / or open them. Overheating, fire
or bursting can be the result.
Never throw batteries / rechargeable batteries
into fire or water.
Do not exert mechanical loads to batteries /
rechargeable batteries.
Risk of leakage of batteries / rechargeable
batteries
Avoid extreme environmental conditions and
temperatures, which could affect batteries /
rechargeable batteries, e.g. radiators / direct
sunlight.
If batteries / rechargeable batteries have leaked,
avoid contact with skin, eyes and mucous mem-
branes with the chemicals! Flush immediately
the affected areas with fresh water and seek
medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries / rechargeable
batteries can cause burns on contact with the
skin. Wear suitable protective gloves at all
times if such an event occurs.
This product has a built-in rechargeable battery
which cannot be replaced by the user. The re-
moval or replacement of the rechargeable bat-
tery may only be carried out by the manufacturer
or his customer service or by a similarly quali-
fied person in order to avoid hazards. When
disposing of the product, it should be noted that
this product contains a rechargeable battery.
Safety / Preparation / Initial use

Preparation

To pair the light with the smartphone you will need
a Gateway and the "Lidl Home" app.
Install the Gateway per the manufacturer
instructions.
Download the "Lidl Home" app from the App
Store.

Initial use

Note: Before first use, remove all packaging mate-
rials and remove the protective films from the light's
cover.
Note: You can choose to power the light either
via the mains connection or using the integrated
rechargeable battery.
Initial use with mains adapter:
Set up the light in the desired location.
Connect the plug-in connector
cable
with the socket
2
Plug the mains adapter
that has been professionally installed.
Switch the light on or off using the ON / OFF
button .
6
Initial use without the mains adapter
(battery power):
Note: To operate the light without the mains
adapter , the integrated battery must be charged.
3
Remove the plug-in connector
cable from the socket
2
the light without a mains connection.
Set up the light in the desired location.
Switch the light on or off using the ON / OFF
button .
6
Charging the
rechargeable battery
Connect the plug-in connector
cable with the socket
2
Plug the mains adapter
that has been professionally installed.
on the mains
4
(see Fig.).
5
into a mains socket
3
on the mains
4
in order to use
5
on the mains
4
(see Fig.).
5
into a mains socket
3
GB/IE 17