Candy CST 26LE/1-88 Bedienungsanleitung Seite 63

DELAY START TIME / WASH
STAGE indicator lights
l
Each time the DELAY START button is
pressed the indicator lights show how
many hours of delay you chosen (3, 6 or
9 hours) and the countdown until the end
of it.
l
When a programme is running, the
indicator lights will light in sequence to
indicate the current phase:
main wash
rinse
spin
DOOR LOCKED indicator light
l
The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
START/PAUSE button.
l
When START/PAUSE
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
cancelled. In this case, close the
door in the proper way and press
the START/PAUSE button.
l
A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before
opening the door. At the end of the cycle
turn the programme selector to OFF.
EXTRA RINSE indicator light
The indicator light will light up when the
button is pressed.
If the option is not compatible with the
selected programme, the relevant indicator
light first flashes and then goes off.
WASH TEMPERATURE indicator
lights
This show the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
If you want carry out a cold wash all the
indicators must be off.
SPIN SPEED indicator lights
This show the spin speed of the selected
programme, you can reduce or omit by the
relevant button.
is pressed on
63