Batteries - SIMARINE Caravan Benutzerhandbuch

6.9.3.1

Batteries

List of batteries that you have added to your Caravan Panel. By selecting a specific battery, you can view or change its
settings or delete the battery if necessary. By selecting "Add new", you can add a new battery.
If the battery connects only to a voltage sensor (without a current sensor), the battery name, approximate state-of-charge
(SOC), and current-voltage are displayed. The calculation of SOC takes some time, so it may not be shown immediately
after power-on.
Up to three batteries without a current sensor can be shown on a single screen. If there are more, they are divided into two
or more screens.
If the battery is connected to a voltage sensor and a single current sensor (shunt), some additional data is displayed: time to
charge, time to discharge, and electrical current (amps). SOC can be calculated more accurately if a current sensor is
connected. Time to discharge is calculated by using an average consumption during a specific period.
If there are more than one current sensor (shunt) connected to the battery (e.g. for monitoring different consumers or
generators connected to the battery), their data (amps) is also shown on the battery page.
41