6.8 Caravan Panel Buttons; Fridge Button; Heating Button - SIMARINE Caravan Benutzerhandbuch

CALIBRATION POINTS – add calibration points for different tank levels. At least two calibration points are required for a
·
correct configuration. More calibration points will enable the Caravan Panel to show tank levels more accurately. Up to 11
calibration points can be added. Set the tank fill volume (liters or gallons) and a corresponding sensor value (resistance or
voltage) for each calibration point.
Confirm and save the tank configuration with the
·
After you exit the settings menu, the new tank should be visible on one of the Caravan's screens (visible on the main menu
screen).

6.8 Caravan Panel buttons

You can enable different devices connected to the SPDU-52 by pressing the button with the corresponding symbol on the
Caravan Panel (e.g. pressing the lights button will turn on the lights). You can also switch between different screens by
pressing the arrow buttons on the touch screen.
There will be a separate screen for each battery with at least one connected current sensor (shunt).
Multiple batteries without a current sensor (measuring voltage only) may be combined on a single screen.
Up to four tanks and four thermometers will be combined on a single screen. If there are more, they are divided into two or
more screens.
6.8.1

Fridge button

The Fridge button is configured on the SPDU-52 as the first button by default (K1 on the cover scheme). Pressing the
button enables the fridge
Note: If the button is enabled, it will glow.
6.8.2

Heating button

The heating button is configured on the SPDU-52 as the second button by default (K2 on the cover scheme). Pressing
the button enables the heating.
Note: If the button is enabled, it will glow.
Up to four temperature sensors can be shown on a single screen. If there are more, they are divided into two or more
screens.
button.
34