6.7 Tank Configuration; Add New Tank - SIMARINE Caravan Benutzerhandbuch

6.7 Tank configuration

The Caravan panel shows all properly configured tanks. Each configured tank will automatically show up on the screen of
the Caravan Panel.
You can find the description for setting up a tank on the Caravan Panel in the following section.
6.7.1

Add new Tank

The following steps are valid for modules SCQ25T, SC302T and ST107. The selected module needs to be installed properly.
Find the installation described in the corresponding module manual. After successfully installing the module, you can
configure the tank by following these steps:
In the settings menu, navigate to DEVICES > TANKS.
Select "Add new" and fill in the required data.
NAME – name the tank accordingly (FRESH WATER, WASTEWATER, FUEL 1, etc.).
·
TYPE – select the tank type (WATER, FUEL, WASTEWATER), which defines the color of the tank on Caravan's screen.
·
SENSOR TYPE – select the used sensor type (RESISTANCE or VOLTAGE).
·
· SENSOR – select the used sensor from the list.
CAPACITY – enter the full tank capacity.
·
33