Olivetti PGL 12en Bedienungsanleitung Seite 15

Loading Paper
4
Place paper with the print side face up, and
against the left edge of the tray.
Make sure that you have not loaded too much
Notes:
print media. The stack should be under the stack height
limit mark. The print media buckles if you load a stack
that is too deep, or push it in too far.
Stack height limit mark
5
Slide the paper width guide to the left flush against
the stack of print material without bending.
6
After printing, push the extender back to its place
and close the Multi-Purpose Tray.
12
All manuals and user guides at all-guides.com
Quick Start-Up