Olivetti PGL 12en Bedienungsanleitung Seite 12

Quick Start-Up
To open the rear output tray:
1
Open the rear door by pulling it down . The cover func-
tions as the output tray.
2
Pull the extender to extend the output tray to its full-
length position to hold longer paper.
3
If you do not want to stack the printed pages on the
rear output tray, slide the extender to its place and
close the tray. The pages will then stack on the top
output tray.
The capacity of the rear output tray is the same
Notes:
as that of the Multi-Purpose Tray. If the tray is over-
loaded with printed pages, it may fall from the printer.
Remove the pages so that the tray is not overloaded.
All manuals and user guides at all-guides.com
Selecting the Output Tray
9