Specifications - Makita DGA450 Betriebsanleitung

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Star marking
5. Indication lamp
6. Shaft lock
7. Slide switch
8. Wheel guard
9. Bearing box
10. Screw

SPECIFICATIONS

Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)/No load speed (n
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
...... Wear safety glasses.
Cd
............ Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
6
Explanation of general view
11. Lock nut
12. Depressed center grinding wheel/
Multi-disc
13. Inner flange
14. Lock nut wrench
15. Abrasive cut-off wheel/diamond
wheel
16. Wheel guard for abrasive cut-off
wheel/diamond wheel
17. Abrasive cut-off wheel
Model
)
0
END221-4
DGA402
100 mm
6.4 mm
M10
2.2 kg
D.C. 18 V
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS GRINDER SAFETY
WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
ENE048-1
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
18. Diamond wheel
19. Thickness: Less than 4 mm
(5/32")
20. Thickness: 4 mm (5/32") or more
21. Exhaust vent
22. Inhalation vent
23. Limit mark
24. Holder cap cover
25. Screwdriver
26. Brush holder cap
DGA450
115 mm
6.4 mm
M14 or 5/8" (country specific)
-1
11,000 min
317 mm
2.2 kg
D.C. 14.4 V
DGA452
6.4 mm
2.3 kg
D.C. 18 V
GEA010-1
GEB059-3