Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control 2
Controller data is sent but not received.
Control 3
Controller data is received and sent.
Control 4
As 3 but with program selection
Adjusting the program changes
Program 0
Program changes will not be sent.
Program 1
Program changes will be received, but not sent.
Program 2
Program changes will be sent, but not received.
Program 3
Program changes will be received and sent.
Overwrite programs
The Save On-function enables quick storing of programs coming from the Midi-contoller to the DFE-212.
If the Save On-function is activated, the DFE-212 receives Controller #28 data. The current adjustments will
be directly saved on the program number corresponding to the controller value.
Please note: the transmission and storage will not require a confirmation. Already existing programs will
immediately be overwritten. Switch this device off as soon as you do not need it any more.
Save Off:
The DFE-212 does not react to Controller #28 data.
The device automatically switches to Save Off when switched off.
SysEx-Dump
With this function, you can transmit the memory content between two DFE-212 or to another Midi Sys-Ex
compatible Sequenzer or computer.
Please note: a received Sys-Ex Dump can delete all settings of a device. If you do not wish that a device
accidentally receives Sys-Ex data, switch it off or adjust another Midi-channel.
Connect the Midi Out-socket of the sending device with the Midi In-socket of the receiving one.
Set the receiving device to SYS RXD and press the Store-button. The device is ready for receiving.
Set the sending device to SYS TXD. Press the Store-button as soon as the receiving device is ready for
receiving.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
21/22
10356510_V_1_0.DOC
Werbung
Inhaltsverzeichnis
