Operating Determinations; Description; Features - Omnitronic DFE-212 Bedienungsanleitung

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

OPERATING DETERMINATIONS

This device is a professional feedback exterminator for eliminating certain feedback frequencies of the
incoming audio-signal. This product is allowed to be operated with an alternating current of 115/230 V, 50/60
Hz and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not operate the device in extremely hot (more than 30° C) or extremely cold (less than 5° C)
surroundings. Keep away from direct insulation (particularly in cars) and heaters.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

DESCRIPTION

Features

Feedback-free weekends guaranteed
• The feedback exterminator avoids quickly and effectively any occurring feedbacks in your amplifying
system
• Connection via balanced XLR-sockets or jacks
• 12 automatically controlled feedback frequencies per channel
• 3 different modes: Single, Auto, Manual
• MIDI-control possible
The OMNITRONIC Feedback exterminator is designed for professional application. The inputs and outputs
are located on the rear panel, the gain controls on the front panel.
The OMNITRONIC DFE-212 is equipped with ¼" input and output jacks.
16/22 10356510_V_1_0.DOC