Unit Description; Overview; Models; Optional Accessories - Ingeteam Ingecon EMS Home Handbuch Für Montage Und Betrieb

Unit description

2. Unit description

2.1. Overview

The basic purpose of the InGECOn EMS Home is to be connected to a public grid to transfer energy from a battery
bank to the grid and vice versa.
The charge/discharge power of the batteries will be defined through an external device responsible for managing
the total energy of the system
Within its product catalogue, Ingeteam has the InGECOn EMS Manager to perform this task.
IngEcon EMS
Power Meter
Public grid
Should the public grid fail, the InGECOn EMS Home will be able to generate an isolated single or three-phase grid
to permanently guarantee energy in our system. In this isolated system, the InGECOn EMS Home will manage the
energy, prioritising renewable sources.

2.2. Models

InGECOn EMS Home units can be fitted with a transformer or not (TL versions).
The main models of the InGECOn EMS Home range are:
Without a transformer
InGECOn EMS Home 2.4TL
InGECOn EMS Home 3TL
InGECOn EMS Home 5TL
InGECOn EMS Home 6TL

2.3. Optional accessories

These units may include the following accessories:
• Communications accessories
• RS-485 connector.
Communications accessories
There are two distinct options for communicating the units. See the Communications Accessories manual
AAX2002IKI01.
RS-485 connector.
This accessory includes the necessary connector for communication via RS-485. The cabling is not supplied.
ABH2000IKE02_ - User manual
IngEcon EMS Manager
IngEcon EMS
Home
Boilers
Batteries
Photovoltaic panel
IngEcon SUn
IngEcon μWInd
Radiator
IngEcon μWInd
Interface
With a transformer
InGECOn EMS Home 2.4
InGECOn EMS Home 3
InGECOn EMS Home 5
InGECOn EMS Home 6
Wind turbine
1Play
dc
Ac
Ac or dc
Ac grid in
backup mode
English - 47
Ingeteam