Hach PAH500 Bedienungsanleitung Seite 17

Figure 8 Formula screen
17. Push confirm.
Note: The turbidity-compensated PAH value (e.g., TRB COMPENS) now shows on the home screen. Refer to
Figure 9.
Figure 9 Home screen
4.3.1 Configure the other 4-20 mA output settings
Configure the other SC1000 Controller settings for the 4-20 mA output as necessary (e.g., SCALE
0mA/4mA, SET HIGH VALUE and SET LOW VALUE).
1. Select SC1000 SETUP > OUTPUT SETUP.
2. Select the output card (e.g., mA OUTPUT INT).
3. Select the 4-20 mA output (e.g., OUTPUT 1).
4. Configure the 4-20 mA output settings. Refer to the Output setup menu section of the
SC1000 Controller User Manual for setting descriptions.
Note: Do not change the SELECT SOURCE setting, which is the name of the turbidity compensation formula
for PAH.
English 17