Product Safety Information; Product Specifications - Ingersoll-Rand W9000 Serie Technische Produktdaten

Product Safety Information

Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause personal injury.
● When a secondary handle is supplied, ensure it is properly installed and use two hands to maintain control when operating the tool.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrand.com
IQ Power Control System
V
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
top of the tool and align the notch with the desired setting. Refer to illustration #2 on page 2.
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.

Product Specifications

Voltage Battery
Tool Model
Model
V, DC
W9491
BL2022
40
(x2)
W9691
Mode
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An excessive
accumulation of grease will result in sluggish operation. See drawing 48380273 and table below. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use.
(Dwg. 48380273)
TL-W9691-PIM_ed1
WARNING
WARNING
Drive
Type Size
Square
1"
Square (Extended)
Intelligent Power Control (W9491, W9691)
Max Torque
Direction
Reverse 2200 (3000)
Forward
2200 (3000)
8h 1
8h 1
Sound Level dB(A)
(EN62841)
†Pressure (L ) ‡Power (L
p
94.0 105.0
95.9 106.9
No Load Speed
ft-lb (Nm)
180 (250)
400 (550)
Conforms to UL STD. 62841-1 & 62841-2-2.
Certified to CSA STD. C22.2 No. 62841-1 & 62841-2-2.
8h 1
Impacts per Vibration (m/s
Minute (EN62841)
) bpm Level
w
25.8
1170
23.5
Shut-off
(rpm)
0-890
500
540
0-890
1
IR#
170
EN
)
2
*K
8.5
7.7
4005366
4004004
EN-1