Product Safety Information; Product Specifications - Ingersoll-Rand 1215Ti Technische Produktdaten

Product Safety Information

Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Free
Drive
Speed
Model
Size rpm
1215Ti 1/4" 225
1225Ti 3/8" 225
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16586323 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve 10. Grease - through fitting
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
04581708_ed4
Recommended
Torque Range
ft-lb (Nm) † Pressure (L
5-25 (7-34)
5-25 (7-34)
7. Coupling
8. Safety Air Fuse
9. Oil
11. Grease - through fitting
12. Grease - Disassemble gearing and lubricate components
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
89.5 100.5
89.5 100.5
EN
Vibration Level
(ISO8662)
) m/s²
w
2.8
2.8
EN-1