Bosch DT1 Anleitung Seite 6

Contents
1 Details of Timer
1.1 Technical Data
1.2 Basic Settings
2 Installation
3 Operation
3.1 Button Functions
3.2 Programming
3.3 Time Display
Safety Instructions
These instructions must be
B
observed to ensure proper function-
ing of the timer.
The timer should only be fitted by an
B
approved installer.
The timer must not be connected to
B
the 230 V mains supply.
6
1 Details of Timer
1.1 Technical Data
6
• Timer may only be fitted in appli-
6
ances with Bosch Heatronic or
7
Bosch Eurotronic
• Combination with programmer
TA 211 E or room thermostat with-
7
out its own timer is possible
• DT 1: single channel, Ch 1 (timer
program with 3 timed periods each
7
day for central heating)
7
8
• DT 2: two channels, Ch 1 (as DT 1)
9
and Ch 2 (timer program with 3
timed periods each day for hot
water).
Dimensions
Rated voltage
Rated current
Ambient temp.
Power buffer
Safety rating
91.7 x 74.,4 mm
18...27 V DC
≤ 10 mA
0... +60 °C
Approx. 12 hours
IP X4
6 720 610 367 (01.10)