Basic Settings; Installation; Operation; Button Functions - Bosch DT1 Anleitung

1.2

Basic Settings

Channel 1 – Ch 1 – Central heating, all
days
• ON : 6:00
• OFF : 22:00.
Channel 2 – Ch 2 – Hot water, all days
(DT 2 only)
• ON : 5:00
• OFF : 22:00.
No other timed periods are pro-
grammed (––:––).
2

Installation

Switch off the central heating boiler.
B
Remove outer case if necessary.
B
Open control panel cover and
B
unhook if necessary.
Press tab (g) and remove blank
B
panel (h) (Fig. 2).
Connect connector (k) to terminal (j)
B
on the main circuit board (ST 5).
Insert timer in the space (i) and snap
B
into position at the top.
Refit the boiler components previ-
B
ously removed.
6 720 610 367 (01.10)
3

Operation

3.1

Button Functions

• Menu button
– PROG: Time, Day
– Ch1 PROG: Timed periods,
Channel 1
– Ch2 PROG (DT 2 only): Timed
periods, Channel 2
– Ch1 PROG: Mode, Channel 1
– CH2 PROG (DT 2 only): Mode,
Channel 2
• C (c): Clear
• (d): Move to next setting
• Set button
– Press and release: changes set-
ting by one unit
– Press and hold: changes setting
continuously.
(b):
Ch
(e) or (f):
7