Jinbei DMII-4 Anleitung Seite 33

Troubleshooting / fault rectification
Flash does not synchronise
• Please check the cable connection between camera / flash or flash
trigger / flash. If necessary, use a different sync cable.
• When using a radio remote control, please check that the
batteries / accumulators of the radio remote control are not empty .
• Please check whether the radio remote control is correctly seated
in the hot shoe of the camera .
• Please check whether identical radio channels and groups are set
on the flash and on the radio remote control.
• Please check whether other devices in the vicinity operate with the
same radio frequency and switch them off if necessary .
Error messages
• "OU" stands for "over use" . The main capacitor is defective and
you must give the flash to a suitable specialist for repair.
• "OT", stands for "over time" . The charging system is defective and
you must hand the flash over to qualified personnel for repair.
If a problem persists, please contact your Jinbei dealer .
33