Control Panel And Remote Control; Installation - Klarstein 10028192 Handbuch

Control Panel and Remote Control

1 Power: Turn on/off the air conditioner.
2 Mode: Select refrigeration, air supply, dehumidification
and auto modes.
3 °C/°F: Realize display conversion between °C and °F.
4 UP/DOWN: When running in refrigeration mode, pressing
this key can regulate setting temperature up and down;
in timer mode pressing this key can regulate turn on/off
time.
5 Air speed: Pressing this key can select high, medium and
low air speeds
6 Timer function key: In standby state pressing this key
can set timer startup time; and in startup state pressing
this key and set time shutdown time.
7 Display window: This window displays the regulated tem-
perature and time.
Storage
Place this machine on horizontal floor close to window; In order to maintain perfect ventilation and
achieve the best performance, a space of at least 50cm around the machine should be reserved.
Exhaust pipe and Window sealplate
1. Measure dimensions of window; Ad-
just the length of window seal plate to
make it fit dimensions of window; After
determination of the length of window
seal plate, fix its length dimension with
screw.
2. Install the fixed window seal plate on
window.
3. Screw exhaust pipe assembly (ex-
haust joint end) into the air outlet on
rear panel (anti-clockwise).
4. Click exhaust pipe assembly (exhaust
flat nozzle end) into window seal plate
assembly and fix with screw.
11

Installation