Shark Micro Bedienungsanleitung Seite 12

ASSEMBLY
1. Reposition the cheek pads (Fig. A).
2. Start the operation by sliding the plas-
tic tabs of the front of the head section
in its housing beginning with one side
(Fig. B).
3. Position the textile correctly (Fig. C).
12
TExTIlE PARTS
4. Go back up adorns him nape of the
neck by inserting one of its side parts,
then the other (Fig. D). Be sure that the
neck pad is not upside down.
A
B
C
D