Maintenance - Carrier 40VU007-7G-QEE Installations- Und Bedienungsanleitung

Maintenance

• Repair can only be performed by qualified professional.
• Before touching the connection line, all power supplies should be switched off. Only after switching off the
power supply can the operator clean the air conditioner as to avoid electric shock or injury.
•When cleaning the air cleaner, make sure to use a stable platform; don't flush the air conditioner with water, or
the electric shock might be caused.
Clean the air cleaner & air inlet grid
• When the air conditioner operates in the environment with too much dust, clean the air
conditioner more frequently.
• Take up the panel then pull forward, draw out from the bottom slowly.
(The panel only can move to left or right, please take down it after conformation).
• Unfasten the thread against the both of ends falling off.
Pull the air filter downward and take it out.
Clean the air outlet port and the shell
• Don't use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean them.
• Do not clean them with hot water of above 50°c to avoid fading or distorting.
• Wipe them with soft dry cloth.
• Water or neutral dry cleanser is recommended if the dust cannot be removed.
• The Wind Deflector can be dismantled to clean (as below).
Attention
Attention
4