Panasonic ES-ST3N Betriebsanleitung Seite 20

Problem
Shaver does not operate
even after charging.
The driving sound
changes while shaving.
Makes a loud sound.
The odor is getting
stronger.
20
Action
Use the appliance in an ambient
temperature approximately 5 °C
or higher.
The battery has reached the
end of its life.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
The shaving sensor is operating.
The sound changes depending
on the beard thickness.
Apply oil.
The blades will not move
smoothly when there is no oil
on the blades, requiring more
power.
The shaver makes a high‑pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
This can be improved by
cleaning every time after shaving.
Problem
The shaver cannot be
properly cleaned even
after water is poured
from the water inlet.
Shavings fly out in all
directions.
System outer foil gets hot.
You do not get as close
a shave as before.
Action
When the shaver is very dirty,
first use the cleaning brush to
remove beard trimmings.
Or, remove the foil frame and
wash with water.
(See page 16.)
This can be improved by
cleaning every time after shaving.
Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
Confirm that the cleaning
shutter is firmly closed.
Apply oil.
Replace the system outer foil if
it is damaged or deformed.
(See page 18.)
Apply oil.
This can be improved by
cleaning every time after shaving.
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years