Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
►Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section [A] to the
shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the system
outer foil [A1].
2. Align the water inlet surface and the
system outer foil mark ( ) and securely
attach together.
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer
foil, preventing complete attachment to
the foil frame.
►Replacing the inner blades
1. Remove the inner blades [A:] one at a
time.
2. Insert the inner blades one at a time.
►Note
Do not throw away the foil frame.
18

FAQ

Question
Will the battery
deteriorate if not used
for an extended period
of time?
Can I charge the shaver
after every use?
Why should the adaptor
be disconnected after
use?
What is the constituent
of the dedicated oil?
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more
than 1 hour will not affect
battery performance, but
disconnect the adaptor for
safety and to save energy.
Constituent of the oil is liquid
paraffin.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis