Victron energy SmartSolar MPPT 150/70-Tr Anleitung Seite 25

Specifications, 250 V models
SartSolar charge controller
Battery voltage
Maximum battery current
Nominal PV power, 12 V 1a,b)
Nominal PV power, 24 V 1a,b)
Nominal PV power, 36 V 1a,b)
Nominal PV power, 48 V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals 3)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5 V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1 V.
2) A higher short circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
4) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels
MPPT 250/70
70 A
1000 W
2000 W
3000 W
4000 W
35 A (max 30 A per MC4
)
250 V absolute maximum coldest conditions
Default setting: 14,4 V / 28,8 V / 43,2 V / 57,6 V (adjustable)
Default setting: 13,8 V / 27,6 V / 41,4 V / 55,2 V (adjustable)
Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable)
multi-stage adaptive (eight preprogrammed algorithms) or user defined
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60 °C (full rated output up to 40 °C)
DPST AC rating: 240 VAC / 4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Yes, parallel synchronised operation with VE.Can or Bluetooth
ENCLOSURE
Two pairs of MC4 connectors (MC4 model 250/70)
Three pairs of MC4 connectors (MC4 models 250/85 and 250/100)
IP43 (electronic components) IP22 (connection area)
3 kg
Tr models: 185 x 250 x 95 mm
MC4 models: 215 x 250 x 95
STANDARDS
EN/IEC 62109-1, UL 1741, CSA C22.2
23
250/85
12/24/48 V Auto Select (36 V: manual)
85 A
1200 W
2400 W
3600 W
4900 W
70 A (max 30 A per MC4 conn.)
245 V start-up and operating maximum
99 %
Less than 35 mA @ 12 V / 20 mA @ 48 V
algrithm
-16 mV/ °C / -32 mV/ °C / -64 mV/ °C
95 %, non-condensing
5000m (full rated output up to 2000m)
Indoor, unconditioned
PD3
VE.Can, VE.Direct or Bluetooth
Yes (2 pole connector)
Blue (RAL 5012)
35 mm² / AWG2 (Tr models)
35 mm² / AWG2
Tr models: 216 x 295 x 103 mm
MC4 models: 246 x 295 x 103 mm
250/100
100 A
1450 W
2900 W
4350 W
5800 W
4,5 kg