Victron energy SmartSolar MPPT 150/70-Tr Anleitung Seite 24

Specifications, 150 V models
SmartSolar charge
controller
Battery voltage
Maximum battery current
Nominal PV power, 12 V 1a,b)
Nominal PV power, 24 V 1a,b)
Nominal PV power, 36 V 1a,b)
Nominal PV power, 48 V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals
Battery terminals
Protection category
Weight
Dimensions (h x w x d) mm
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5 V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1 V.
2) A higher short circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
22
MPPT 150/70
12/24/48 V Auto Select (36 V: manual)
70 A
1000 W
2000 W
3000 W
4000 W
50 A (max 30 A per MC4 conn.)
150 V absolute maximum coldest conditions
145 V start-up and operating maximum
Less than 35 mA @ 12 V / 20 mA @ 48 V
Default setting: 14,4 V / 28,8 V / 43,2 V / 57,6 V (adjustable)
Default setting: 13,8 V / 27,6 V / 41,4 V / 55,2 V (adjustable)
Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable)
multi-stage adaptive (eight preprogrammed algorithms) or user defined
-16 mV/ °C / -32 mV/ °C / -6 4mV/ °C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60 °C (full rated output up to 40 °C)
95 %, non-condensing
5000 m (full rated output up to 2000m)
Indoor, unconditioned
VE.Can, VE.Direct or Bluetooth
Yes (2 pole connector)
DPST AC rating: 240 V AC/4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Yes, parallel synchronised operation with VE.Can or Bluetooth
ENCLOSURE
35 mm² / AWG2 (Tr models),
Two pairs of MC4 connectors (MC4 model 150/70)
Three pairs of MC4 connectors (MC4 models 150/85 and 150/100)
IP43 (electronic components) IP22 (connection area)
3 kg
Tr models: 185 x 250 x 95
MC4 models: 215 x 250 x 95
STANDARDS
EN/IEC 62109-1, UL 1741, CSA C22.2
150/85
85 A
1200 W
2400 W
3600 W
4900 W
70 A (max 30 A per MC4 conn.)
98 %
algrithm
PD3
Blue (RAL 5012)
35 mm² / AWG2
4,5 kg
Tr models: 216 x 295 x 103
MC4 models: 246 x 295 x 103
150/100
100 A
1450 W
2900 W
4350 W
5800 W