Victron energy SmartSolar MPPT 150/70-Tr Anleitung Seite 17

Pressing the "-" button or the "+"button for 4 seconds activates the auto-
scroll-mode. Now all LCD-screens will pop-up one by one with short
intervals. The auto-scroll-mode can be stopped by pressing the "-" or the "+"
button shortly.
3.14 Pluggable LCD display - History data
The charge controller tracks several parameters regarding the energy
harvest. Enter history data by pressing the SELECT button when in monitor
mode, a scrolling text will be visible. Press + or – to browse the various
parameters as shown in the table below, press SELECT to stop scrolling and
show the corresponding value. Press + or – to browse the various values.
For the daily items it is possible to scroll back to 30 days ago (data becomes
available over time), a brief popup shows the day number. Press SELECT to
leave the historical menu and go back to the monitor mode, alternatively
press SETUP to return to the scrolling text.
Scrolling text
 
 
  
  

  
  
 
 
 
 
 
  
  
Note:
When the charger is not active (night time) the bulk, absorption and float icons will be shown
as in the table above.
When the charger is active only one icon will be shown: the icon corresponding to the actual
charge state.
3.15 Pluggable LCD display - Setup menu
a. To enter the SETUP Menu, press and hold the SETUP-button during 3
seconds. The "Menu" icon will light up and a scrolling text is visible.
b. Press the "-" or "+" button to scroll through the parameters.
c. The table below lists, in order of appearance, all parameters which can be
adjusted by pressing the "-" button.
d. Press SELECT: the parameter to change will now blink.
e. Use the "-" or "+" button to chose the desired value.
f. Press SELECT to confirm the change, the value will stop blinking, and the
change is made final.
g. Press SETUP to return to the parameters menu. With the "-" or "+" button
it is now possible to scroll to another parameter that needs change.
15
Icons (1) Segments Units
kWh
.
 
 
 
 
V
 .
V
 .
Day kWh Daily yield
 .
Day V
 .
Day V
 .
Day
 
Day
 
Day
 
Day
 
Day
 
Day
 
Day
 
Day W
 
Day A
 .
Day V
 .
Displayed info
Total yield
Total error 0 (most recent)
Total error 1 (shown when available)
Total error 2 (shown when available)
Total error 3 (shown when available)
Total panel voltage maximum
Total battery voltage maximum
Daily battery voltage maximum
Daily battery voltage minimum
Daily error 0 (most recent)
Daily error 1 (shown when available)
Daily error 2 (shown when available)
Daily error 3 (shown when available)
Daily time spent in bulk or ESS (minutes)
Daily time spent in absorption (minutes)
Daily time spent in float (minutes)
Daily power maximum
Daily battery current maximum
Daily panel voltage maximum