Miele PDR 914 HP Kurzgebrauchsanweisung Seite 152

en - Installation
Tilt the heat-pump backwards slightly and move the tumble dryer towards the heat-

pump until the lower clamping lug on the heat-pump is above the lower bevelled edge on
the tumble dryer.
Now carefully tilt the heat-pump forwards again so that the clamping lug hooks in behind

the bevelled edge on the tumble dryer.
a
Tumble dryer
The clamping lug connects the heat-pump to the tumble dryer. Once this step is complete,
the tumble dryer should no longer be able to move away.
Put the tumble dryer lid on top of the tumble dryer and clamp the upper clamping lug of

the heat-pump beneath the tumble dryer lid.
152
b
Heat-pump