Installation And Commissioning - Siemens SIPROTEC easy 7SJ45 Handbuch

Manual 7SJ45
X11
T3
T2
T1
Figure 2-5 Jumper location for the 7SJ45 with relay output
C53000-K1174-C001-7
H1
T6
T5
T4
2.9

Installation and commissioning

WARNING!
Hazardous voltages are present in this electrical equipment during
operation. Non–observance of the safety rules can result in severe
personal injury or property damage. In particular, all safety notes and
warnings must be strictly observed.
The 7SJ45 overcurrent protection must be installed in a switchgear
cubicle, or on a standard DIN rail if installed on a switchgear panel.
After the installation, the entire terminal area must be sufficiently
protected against inadvertent contact with live parts.
Installation and commissioning
57