Before Locating The Fixing Brackets; Caution - Rotel U1140CH Gebrauchsanweisung

Before locating the fixing brackets

o The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
o Fix the hob on the work surface by screwing four brackets on the bottom of the hob
(see picture) after installation.
o Under no circumstances should the brackets come into contact with the inner sur-
faces of the worktop after installation (see picture).

Caution

o The cooker hob must be installed by qualified personnel or technicians. Please never
conduct the operation by yourself.
o The cooker hob shall not be mounted to cooling equipment, dishwashers and rotary
dryers.
o The installation of the cooker hob must ensure optimum heat radiation to enhance
the reliability of the device.
o The wall and induced heating zone above the work surface must be able to withstand
heat.
o To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner is not to be used.
o
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
113