Rotel U1140CH Gebrauchsanweisung Seite 110

Heating stops sud-
denly during opera-
tion and the display
flashes "u".
Heating zones of the
same side (Such as
the first and the sec-
ond zone) would
display "u".
Fan motor sounds
abnormal.
o The above are the judgment and inspection of common failures.
o Please do not disassemble the unit by yourself to avoid any dangers and damages to
the induction hob.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Pan type is wrong.
Pot diameter is too
small.
Cooker has over-
heated.
The power board
and the display
board are connected
incorrectly.
The display board of
communicate part is
damaged.
The Main board is
damaged.
The fan motor is
damaged.
110
Use the proper pot
(refer to the instruc-
tion manual.)
Unit is overheated.
Wait for tempera-
ture to return to
normal.
Push "ON/OFF" but-
ton to restart unit.
Check the connec-
tion.
Replace the display
board.
Replace the power
board.
Replace the fan.
Pan detection circuit
is damaged, replace
the power board.