Intended Use; Power Supply - Makita HR2652 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities
No load speed
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model HR2652
Sound pressure level (L
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR2653
Sound pressure level (L
Sound power level (L ) : 103 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR2653T
Sound pressure level (L
Sound power level (L ) : 103 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR2663
Sound pressure level (L
Sound power level (L ) : 101 dB (A)
WA
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
) : 91 dB(A)
pA
) : 92 dB(A)
pA
) : 92 dB(A)
pA
) : 90 dB(A)
pA
HR2652 HR2653
0 - 1,200 min
0 - 4,600 min
604 mm
3.0 - 4.3 kg 3.1 - 4.3 kg
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-6:
Model HR2652
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HR2653
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HR2653T
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HR2663
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
8 ENGLISH
HR2653T
26 mm
68 mm
80 mm
13 mm
32 mm
-1
0 - 1,100 min
-1
0 - 4,500 min
630 mm
3.2 - 4.5 kg 3.3 - 4.6 kg
/II
2
): 12.5 m/s
h, HD
2
2
): 9.5 m/s
h, Cheq
2
2
) : 2.5 m/s
h,D
2
2
): 11.5 m/s
h, HD
2
2
): 9.0 m/s
h, Cheq
2
2
) : 2.5 m/s
h,D
2
2
): 11.5 m/s
h, HD
2
2
): 9.0 m/s
h, Cheq
2
2
) : 2.5 m/s
h,D
2
2
): 9.5 m/s
h, HD
2
HR2663
-1
-1
666 mm