Bosch Wallscanner D-tect 200 C Professional Originalbetriebsanleitung Seite 46

46 | English
<Spot View>
In the <Spot View>, a first measuring result is already displayed without moving the
measuring tool over the substrate. It is therefore particularly suitable for measurements
in corners or narrow places. The maximum measuring depth is 6 cm. Objects found are
displayed with material properties, if available, but without depth information.
Whenever possible, you should also move the measuring tool over the substrate in
the <Spot View> to ensure the best possible measurements. Locating plastic pipes and
timber joints is particularly limited without moving the measuring tool.
Measuring indicator:
If no object is found, only the outer circle will appear on the display and it will light up
green.
If there is an object nearby, the outer circle will light up red. The closer the measuring
tool is to an object, the more the deflection in the measuring indicator (number of
circles) will increase. The deflection decreases when the measuring tool moves away
from the object.
Orientation arrows are displayed if the signal strength is sufficient. To specifically locate
the object's centre, move the measuring tool in the direction of the orientation arrows.
Above the centre of an object, the measuring indicator will exhibit maximum deflection,
and with sufficient signal strength, a centre cross is displayed. The colour coding for the
material property is identical to that in the <Object View>.
If the orientation arrows or the centre cross are not displayed, an object may neverthe-
less be located in the immediate vicinity.
1 609 92A 5L5 | (11.01.2021) Bosch Power Tools