Specifications - Makita DGA404 Bedienungsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n) / No load speed (n
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model DGA404
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DGA454, DGA504
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DGA404
Work mode : surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DGA454, DGA504
Work mode : surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model
)
0
With battery cartridge
BL1815N, BL1820, BL1820B
With battery cartridge BL1830,
BL1830B, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
With battery cartridge
BL1815N, BL1820, BL1820B
With battery cartridge BL1830,
BL1830B, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
) : 80 dB (A)
pA
) : 91 dB (A)
WA
) : 79 dB (A)
pA
2
) : 4.5 m/s
h,AG
2
2
) : 4.0 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 6.5 m/s
h,AG
2
2
) : 6.0 m/s
h,AG
2
DGA404
100 mm (4")
6.4 mm (1/4")
M10
2.2 kg
2.4 kg
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
NOTE: The declared vibration emission value is used
for main applications of the power tool. However if the
power tool is used for other applications, the vibration
emission value may be different.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
6 ENGLISH
DGA454 DGA504
115 mm (4-1/2") 125 mm (5")
6.4 mm (1/4") 6.4 mm (1/4")
M14 or 5/8" (country specific)
-1
8,500 min
348 mm
362 mm
2.3 kg
2.5 kg
D.C. 18 V
2
) : 2.5 m/s or less
h,DS
2
2.3 kg
2.5 kg