Inhaltsverzeichnis; Introduction - Husqvarna 150BT Mark II Bedienungsanweisung

Introduction..................................................................... 6
Safety..............................................................................7
Assembly........................................................................ 9
Operation...................................................................... 10
Maintenance................................................................. 12
Product description
This product is a backpack blower with a fuel engine.
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of products without prior notice.
Product overview
(Fig. 1)
1. Throttle control lever
2. Frame
3. Harness
4. Engine cover
5. Fan cover
6. Air intake screen
7. Air filter
8. Starter rope handle
9. Fuel tank
10. Waist belt
11. Spark plug
12. Vibration damping system
13. Choke control
14. Control handle
15. Stop switch with throttle control
16. Throttle trigger
17. Pipe angle
18. Clamp
19. Flexible hose
20. Control pipe
21. Cable clamp
22. Intermediate pipe
23. Blower nozzle
24. Operator's manual
25. Combination wrench
26. Air purge bulb
27. High speed nozzle
28. Idle adjustment screw
29. Fan
30. Foot plate
6
Contents
Troubleshooting............................................................ 14
Transportation and storage...........................................15
Technical data.............................................................. 16
EC Declaration of Conformity....................................... 17

Introduction

Intended use
Use the product to blow leaves and other unwanted
material from areas such as lawns, pathways and
asphalt roads.
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
WARNING! This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection. If the
environment contains dust, use a
breathing mask.
Use approved protective gloves during
operation and maintenance. Use
protective boots or shoes with non-slip
soles. Use clothing of strong fabric and of
full length.
Make sure that long hair is put above your
shoulders.
Do not wear jewelry or loose clothing
during operation.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Keep all body parts away from hot
surfaces.
Do not go near the impeller as it turns.
1456 - 003 - 21.05.2021