During A Call; To Adjust The Handset Volume; Mute Function; To Switch Between The Handset And The Speakerphone - Maxcom KXT480 Bedienungsanleitung

ENGLISH
6.4

During a call

To adjust the
handset volume

MUTE Function

To switch
between the
Handset and the
Speakerphone
To adjust the
speakerphone
volume
7

CALLER DISPLAY OPERATION

VERY IMPORTANT:
To use Caller Display you must first subscribe to your network provider's Caller Display service.
If you subscribe to a Caller Display service, you can see the phone number of the person calling
you before you answer. The caller display information includes:

The caller's number (up to 14 digits)

The date and time of the call
Condition of Incoming Caller Information
It is a duplicate one
It is a new one
A call from someone whose number is unavailable
(for example
an international call).
A call from someone whose number is withheld
The caller Display is incomplete or corrupted
Your have a new Voice Mail Message
(This is a caller display service, but is not usually
available from network providers.)
7.1

Caller Display list

Telephone automatically stores the caller display information from the last 20 (14 digits) incoming
new calls are stored, the New calls LED flashes and the display icon NEW is on with the number of new calls
indicated.
The total number of calls is shown on the main standby screen by '00 CALL', '01 CALL' or ' XX CALLS'.
received when the Call list is full, then the new entry will replace the oldest one.
Viewing the
Caller Display
list
Adjust the volume of the handset to your comfortable
volume level using the Handset volume switch located on
the top cover of the Base unit
During a call press MUTE button.
During a phone conversation through the Handset, press
the SPEAKERPHONE button to speak hands-free.
Adjust the volume of the speakerphone to your
comfortable volume level using the SPEAKERPHONE
volume switch located at the right side of the Base unit.
In standby mode, press UP or DOWN button.
1
If there are no Caller Display records, the display will show
End.
Press UP or DOWN again to scroll to the next
2
Caller Display
When the mouthpiece is muted, the person at the
other end of the call cannot hear you but you can
hear his side
The conversation remains through the Handset
until the Handset is replaced
Speakerphone light will turn on . While in
Then the
speakerphone mode, lift the Handset to switch off the
Speakerphone and talk through
LCD Screen will display
REP
NEW
UNAVAILABLE
WITHHELD
ERROR
The display shows the most recent record.
20
on the Base unit cradle
the Handset.
calls. If
If a call is