Telephone Operations; To Answer A Call; Making A Call; To End A Cal - Maxcom KXT480 Bedienungsanleitung

In standby mode, press SET/STO button.
1
2
Press UP or DOWN button until the display shows 'SET 3 FLASH'.
Press SET/STO to confirm.
3
Press UP or DOWN button to select 100 (default),300, 600, or 1000.
4
Press SET/STO button to confirm the setting. The display shows ' SET 1
5 DATE ' , you can continue with programming
,or press DELETE button to return standby mode.
6

TELEPHONE OPERATIONS

6.1

To answer a call

When the phone rings;
Lift the handset or press the SPEAKERPHONE button on the Base unit.
The Call timer starts after going on line.
6.2

Making a call

1
Lift the Handset, listen for a dial tone
Dial the telephone number you wish to call.
2
To end the call, return the Handset to the Base unit.
6.3

To end a cal

Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button
on the Base unit.
The SPEAKERPHONE light indicator will turn OFF.
The display shows ' SET 1 DATE '.
The display shows ' 00-00 '.
The display shows the number as you 14 digits dia l(maximum of
will be shown).
19
ENGLISH