Other Convenient Rds Functions And Adjustments; Automatic Selection Of The Station When Using The Number Buttons - JVC KD-SH99R Bedienungsanleitung

4
Press and hold the number button for
more than 2 seconds to store the PTY
code selected into the preset number
you want.
"MEMORY" and the selected code name will
flash alternately. Then, only the selected code
name will continue flashing on the display.
5
Press SEL (select) to finish the setting.
To search your favorite programme type
1
Press and hold PTY (programme type)
for more than 1 second while listening
to an FM station.
The last selected PTY code appears.
2
Select one of the PTY codes stored in
the preset number buttons (1 to 6).
Ex.: When "ROCK M" is stored in preset
number button 2
PTY search for your favorite programme
starts after 5 seconds.
14
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned into.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
Other convenient RDS functions
and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned into.
However, when the preset station is an RDS
station, something different will happen. If the
signals from that preset station are not sufficient
for good reception, this unit, using the AF data,
tunes into another frequency broadcasting the
same programme as the original preset station
is broadcasting. (Programme search)
• The unit takes some time to tune into another
station using programme search.
To activate programme search, follow the procedure
below.
• See also "Changing the general settings (PSM)"
on page 30.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
Press ¢
2
or
"P-SEARCH."
3
Turn the control dial clockwise to select
"SEARCH ON."
Now programme search is activated.
4
Press SEL (select) to finish the setting.
To cancel programme search, repeat the same
procedure and select "SEARCH OFF" in step 3 by
turning the control dial counterclockwise.
4 to select