JVC KD-SHX701 Bedienungsanleitung Seite 17

• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception).
To activate TA Standby Reception, tune in to
another station providing these signals.
When you tune in to such a station, the TP
indicator stops flashing and remains lit. Now
TA Standby Reception is activated.
To deactivate the TA Standby Reception:
TP/PTY
The TP indicator goes off.
Using PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite programme
(PTY: Programme Type) from any source other
than AM.
To activate PTY Standby Reception
You can select your favorite programme type
for PTY Standby Reception. Once you select a
new PTY code following the procedure below,
PTY Standby Reception is automatically
activated.
1
While playing any source...
The Main Menu appears on
MENU the display.
2
Move the cursor to "PSM" on the Main
Menu.
3
BAND
4
5
6
• If the PTY indicator lights up, PTY Standby
Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals.
When you tune in to such a station, the PTY
indicator stops flashing and remains lit. Now
PTY Standby Reception is activated.
Cursor
Enter the PSM Menu.
OK
The last selected item appears (highlighted)
with the current setting.
Select "PTY Stnby (standby)."
Select a PTY code (see page 20).
Now PTY Standby Reception is activated
with a newly selected PTY code.
Finish the setting.
MENU
PTY indicator
(either lights up or flashes)
17