OEM SUPERTOP Bedienungsanleitung Seite 98

Technical compartment temperature probe short
circuit
(only for American market)
When this alarm is activated, the "TC2" alarm appears
on the display
This indicates that the technical compartment tempera-
ture probe is short circuited; the oven is turned off.
Call the technical support to replace the probe.
Main board heat sink overheating
When this alarm is activated, the "NTC" alarm appears
on the display.
This alarm indicates that the temperature of the power
board heat sink reached an excessive value.
Turn off the oven and check proper operation of the
cooling fans of the technical compartment.
Power board heat sink temperature probe short
circuit
When this alarm is activated, the "NTC" alarm appears
on the display.
This indicates that the main board temperature probe is
short circuited; the oven is turned off.
Call the technical support to replace the power board.
EN - 40
SUPERTOP - SUPERTOP VARIO
5.14.a Steamer alarms
Safety thermostat
When you insert this alarm on the display, next to the
steamer symbol, the symbol (1) and (2) appears. It
indicates that the temperature inside the steamer has
exceeded 512°; the heating of the steamer is turned off.
Rearm the safety thermostat as indicated in its para-
graph.
1
Interrupted probe
When you insert this alarm on the display, next to the
steamer symbol, the symbol (1) and (2) appears. It in-
dicates that the temperature probe inside the steamer
is interrupted or disconnected; the steamer is turned off.
Call the technical support service for the control and/or
replacement of the probe.
Steamer in "Over-temperature" alarm
When you insert this alarm on the display, next to the
steamer symbol, the symbol (1) and (2) appears. It
indicates that the temperature inside the steamer has
exceeded 300°; the heating of the steamer is turned off.
Try restarting the steamer again, if the alarm goes back,
call the technical support service.
1
Functioning
2
2
1
2