Problems And Solutions - Chicco Humi3 Bedienungsanleitung

Problem
If the humidifier does not work
If the device ON/OFF indicator
LED (1) is on but the nozzle expels
air and not steam
Strange odour
This product complies with the Directive
2012/19/EU.
The crossed bin symbol on the appliance in-
dicates that the product, at the end of its life,
must be disposed of separately from domestic
waste, either by taking it to a separate waste
disposal site for electric and electronic appli-
ances or by returning it to your dealer when
you buy another similar appliance. The user is
responsible for taking the appliance to a spe-
cial waste disposal site at the end of its life. If
the disused appliance is collected correctly as
separate waste, it can be recycled, treated and
disposed of ecologically; this avoids a nega-
tive impact on both the environment and
health, and contributes towards the recycling
of the product's materials. For further infor-
mation regarding the waste disposal services
available, contact your local waste disposal
agency or the shop where you bought the
appliance.
Declaration of EC Compliance:
This humidifier device Chicco Model UM560
3
Humi complies with all the essential require-
ments and other provisions indicated in the
EU Directives 2004/108/EC (electromagnetic

PROBLEMS AND SOLUTIONS

Make sure that the plug of the AC/DC adaptor cord is cor-
rectly inserted in the product socket (3) and that the AC/DC
adaptor (7) is connected to the mains socket.
Check that the on (I) off (O) (2) switch is on the on posi-
tion (I).
Make sure that the water in the tank is at the correct level
(not below the minimum level).
Check if there are scale residues on the water level sensor
or transducer.
Make sure that the water in the tank is at the correct level
(not below the minimum level).
Clean the device following the instructions provided. Air the
water tank (5) in a cool place for 12 hours.
compatibility), 2006/95/EC (Low Voltage), and
2011/65/EC (RoHS).
A copy of the EC declaration can be requested
from manufacturer Elettroplastica S.p.A. - Via
del
Commercio, 1 - 25039 Travagliato (BS) Italy
or alternatively from the distributor Artsana
S.p.A. - via Saldarini Catelli, 1 - 22070 Grandate
(CO) Italy.
WARRANTY
For the warranty for product defects see the
specific provisions of applicable national laws
in the country where purchased, if required.
The warranty does not cover components
subject to normal wear and tear.
Distributed by: Artsana S.p.A. - via Saldarini
Catelli, 1 - 22070 Grandate (CO) - Italy
Manufacturer: Elettroplastica S.p.A. - via del
Commercio, 1 - 25039 Travagliato (BS) Italy
Made in China
25
Solution