Klarstein VIRTUOSA 10029239 Bedienungsanleitung Seite 38

EN
38
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. Note: you can use the minute minder
even if you're not selecting any cooking zone.
2. Touch the Timer key.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-"
control of the timer once to decrease or increase by 1 minute. Hold the „+/-"
control of the timer to decrease or increase by 10 minutes. Scrolling the „-" to
the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the timer indicator will flash for 5 seconds.
5. Buzzer will beeps for 30 seconds and the timer indicator shows "- - " when the
setting time finished.
Setting the timer to turn one cooking zone off
1. Touch the heating zone selection control.
2. Touch timer control , The minder indicator will start flashing and "30" will show
in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-"
control of the timer once to decrease or increase by 1 minute. Hold the „+/-"
control of the timer to decrease or increase by 10 minutes. Scrolling the „-" to
the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the timer indicator flash for 5 seconds. The red
dot next to power level indicator will illuminate indicating that zone is selected
(see picture).