Klarstein VIRTUOSA 10029239 Bedienungsanleitung Seite 35

Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. Note: you can use the minute minder
even if you're not selecting any cooking zone.
2. Touch timer control , The minder indicator will start flashing and "30" will show
in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-"
control of the timer once to decrease or increase by 1 minute. Hold the „+/-"
control of the timer to decrease or increase by 10 minutes. Scrolling the „-" to
the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the timer indicator will flash for 5 seconds.
5. Buzzer will beeps for 30 seconds and the timer indicator shows "- - " when the
setting time finished.
Setting the timer to turn one or more cooking zones off
1. Select a heating zone by touching „+/-" control, and a indicator between the
key will flash, the default power setting is levels "5"
2. Touch timer control , The minder indicator will start flashing and "30" will show
in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-"
control of the timer once to decrease or increase by 1 minute. Hold the „+/-"
control of the timer to decrease or increase by 10 minutes. Scrolling the „-" to
the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the timer indicator will flash for 5 seconds. The
red dot next to power level indicator will illuminate indicating that zone is
selected.
5. When cooking timer expires, the corresponding cooking zone will be switch
off automatically.
Note: If you want to change the time after the timer is set, you have to start
from step 1. Other cooking zone will keep operating if they are turned on
previously.
EN
35