Before Commissioning - Bresser Thermo Hygro Quadro Neo Bedienungsanleitung

1 Battery status (base sta-
tion)
3 Trend arrow
5 Indoor humidity (in %)
7 Outdoor humidity (wire-
less sensor)
9 Room description (for
sensor location)
11 current time or alarm
time
13 Symbol for enabled
alarm
15 Radio clock signal re-
ception icon
17 Current date
19 Symbol for connection
to the wireless sensor

6 Before commissioning

NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1. Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
2. Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
2 Symbol for the indoor
display
4 Indoor temperature
6 Battery status (wireless
sensor)
8 Outdoor temperature
(wireless sensor)
10 Symbol for active
snooze function
12 AM/PM display in 12-
hour mode
14 Symbol for active time
zone setting
16 Symbol for active day-
light saving time
18 Current day of the week
20 Channel of the radio
sensor
9 / 40