Checklist For Unit Installation - Knurr Cooltherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung
9.2

Checklist for unit installation

Checked performed
Check unit for damage on delivery
Check for level floor
Check max. floor load
CoolTherm feet adjusted
CoolTherm is level
No remains of packaging in the
CoolTherm
All installation tools removed
Cable entries into the
unit correct and air-tight
Cable connections checked
Chilled water connection does not leak
Pressure test performed
Chilled water network bled
Chilled water flow rate adjusted
Condensed water pipe clear
Chilled water system odour trap in order
Heat exchanger tray connected to
condensed water pipe
Fan function checked
All front panels closed
(separation of air flows)
.............................................
Place:
CoolTherm
Completed
(After completion confirm
)
with signature
........................................
Date:
01.998.330.0 issue / Ausgabe h
Comments
....................
Signature
Checker
page / Seite 33/76